Häufig gestellte Fragen

No. Once drawers are added, a Load-Up stack is no longer IP65 rated. Standard Load-Up boxes are sealed and weather resistant, but drawer units aren’t due to small gaps around the drawers mean the unit can’t be fully sealed, so they aren’t watertight.

Load-Up 1 Drawer Tool Box
• 11" deep drawer

Load-Up 2 Drawer Tool Box
• Drawer 1: 3.5" deep drawer
• Drawer 2: 7" deep drawer

Load-Up 3 Drawer Tool Box
• All 3 drawers are 3.5" deep

The drawers extend fully, allowing access to the entire depth of the box.

Modular storage typically refers to customisable and flexible storage systems designed to organise, store, and transport tools and equipment.

BUNKER standalone units come fully assembled with all necessary fittings and instruction manuals for easy installation. Our modular storage systems are delivered on pallets and require two people for handling due to their heavy construction.

The 1 door (33165) and 2 door (33166) tall floor cabinet, plus the wall cabinet 33162. The rest of the BUNKER modular individual units are bolted together with either a worktop, back panel or wall bracket.

A modular storage system consists of individual storage units that can be combined in different configurations to suit your needs and requirements. BUNKER is leading the way with smart modular storage solutions suitable for any environment.

Modular Side Wall Double Brackets (33198) go in-between each unit to fix the back panel/pegboard, whereas the Modular Side Wall Single Brackets (33197) only go on the end of your back panel/pegboard.

You can build a BUNKER with just the floor units and the wall cabinets. The wall cabinets are bolted to the wall, so you do not need a back panel/pegboard if you don’t want one. However, you do need a worktop because it holds the floor units together.

All sizes, dimensions and weights are approximate and subject to reasonable accepted manufacturing tolerances.

Yes, we have a range of spare parts, from ball-bearing runners and bolts to wheels.

They come pre-built. Remember to add on your worktops separately if you’re building BUNKER your way and not choosing a pre-determined combination.

When installing a corner unit, you need to be aware of the units that are either side and consider the clearance when opening drawers and doors.

Products that can’t be either side of a corner unit are the tall floor cabinets (33166) and (33165).

Yes, the locks and keys are the same on the modular storage units, roller cabinets, workstations etc..

Yes you can.

The maximum load per drawer or shelf varies from product to product. Modular storage units range from 22.7kg for a wall cabinet and base unit, to 36.4kg for a cupboard.

For roller cabinets, the maximum load per single runner drawer is 50kg and 100kg per double runner drawer.

Please see the product pages for more information.

Certain units need to be bolted to a wall and are secured using single and double wall brackets.

Not at the moment, but watch this space.

1 tonne.

No, we do not.

BUNKER van storage has been awarded with two premium safety accreditations; Sold Secure, an independent test house for security products and the police-backed Secured by Design initiative.

Our heavy-duty boxes went through rigorous testing to achieve these statuses and offer excellent protection against tool theft. 

The boxes also come with a holder for a Bluetooth trackable device such as an AirTag, for an added level of security. 

a.      Storage Box T1: 42kg
b.      Sliding Box S1: 50kg (maximum weight load capacity 300kg)
c.      Stacking Box K1: 36kg (maximum weight load capacity 300kg)

a.      Storage Box T1: 935 x 530 x 490mm
b.      Sliding Box S1: 500 x 1200 x 312mm
c.      Stacking Box K1: 905 x 473 x 312mm

Before installing into a vehicle, please ensure that you consult and follow your vehicle handbook and locate the appropriate fittings for this product. Please use the pre-drilled fixing points and the fixings supplied.
We do not accept any liability or responsibility for any damage to, or effects on, a vehicle caused by incorrect installation or the selection of unsuitable fixings. 

You will receive four of each of the following:
Vehicle installation fixings are different for 01735/07136 and 07134/07137 with regards hex bolts and brackets

K1, S1 & T1:
Hex Head Bolt M10 x 40mm (K1 – M10 X 20mm)
M10 Shear Nut
M10 Washer
Tapping Screw M10 x 30mm
M10 Sealing Washer

01735/07136 S1 – additional fixings:
L-Brackets
8 X Hex Head bolt M6 X 12mm
8 X M6 Washers 

BUNKER Van Storage comes with a 12-month warranty which extends to 10 years upon registration. You must register your product within 28 days of purchase. Register here.

Please contact our customer service team for assistance.

Replacement keys are available if you registered your van storage for the full 10-year warranty. Please reach out to our customer service team and they'll be able to help. 

Insurers recognise the Sold Secure and police-backed Secured by Design accreditations, which may lead to a reduced premium. Please speak to your insurance company as every insurer is different.

At present, we don’t, but it’s something we’re looking into. Watch this space!

BUNKER is owned by Draper Tools Limited. If you get mixed product marking and you’d like your badges replaced so it matches, please contact us and we’ll send out new ones for you.

Visit our warranty page and complete the form with all your details. Once submitted, your new BUNKER products will be covered by our 10-year warranty.

Our BUNKER modular storage systems and units require very little maintenance. Simply wipe down the surface, and they’re ready to go again.

You can purchase your new BUNKER from our extensive network of online stockists, click Find a platinum installer to view the full list.

BUNKER return policies vary by stockist. Please check the return policy information with your preferred stockist before purchasing.